- Scaffoldings[10]
- Furniture Casters[10]
- Other Hardware[10]
- Material Handling Equipment Parts[10]
- Pulleys[4]
- Shopping Trolleys & Carts[2]
- Tool Parts[9]
- Contact Person : Ms. Rounya Fenny
- Company Name : Yangdong Rounya Hardware Factory
- Tel : 86-662-2277731
- Fax : 86-662-6112030
- Address : Guangdong,Yangjiang,No.A1-2, 1st Industrial Zone, Yangdong Country
- Country/Region : China
- Zip : 529932
Related Product Searches:PC20 single swivel small hook cam pulley,High Quality,hook cam pulley, swivel pulley with hook,PC20
hook cam pulley | |
Wheel Dia: | 20mm |
Groove Width: | 3mm |
Groove depth: | 4mm 5mm |
Housing Thichness: | 1.0mm |
Hook size: | 23x15x3mm |
The use of a pulley will greatly facilitate well construction work. If unavailable, arrange a cross
piece with a smooth surface over which you can pull the rope. It is far more preferable to pull
the rope over a pulley than try to stand at the well edge and pull the rope straight up hand over
hand. Ropes will wear much faster when pulled over even a relatively smooth surface than when
a pulley is used and should therefore be checked frequently.
Mark | Definition |
Indicating dangerous situation which is critical for safety as incorrect use may inflict the personal death or serious injury. | |
Indicating dangerous situation which is critical for safety as incorrect use may inflict the personal death, serious injury or property damage. | |
Indicating dangerous situation as incorrect use may inflict the light personal injury or property damage. |
Installation
*Select a model within the range of recommended load per 4 casters of product not exceeding the
maximum loads of equipment or carts.
*Tightly fasten the plate of both faces with bolts & nuts. not to have any gaps.
*Once the model is selected. manufacture the hole distance, hole size, tap & others of Top Plate &
Equipment Plate of selected model either identical or mountable.
How to use
*Following instruction must be complied when using the product, a caster making equipment or carts'
moving easier. Failure in compliance of following instruction may cause the damage on caster, physical
loss of equipment or personal injuries.*Distinguish Manual Driven Casters and Power Drive Casters as per the characteristic of product.
*The moving of Manual Driven Casters should be made with a speed slower than 4km/h and Power
Driven Casters should be made with a speed slower than 20km/h.*Pay attention not to have the loads of equipment or carts laid to one side, as it may cause inclination.
http://www.rounya.com http://www.ry-caster.com
PC20 single swivel small hook cam pulley