TPR wheel Conductive bolt hole swivel shopping cart caster

1.Bolt hole swivel shopping cart caster 2.bolt hole fitting 3.with or without threadguards 4.Bolt hole rigid is available

Technical Data
Wheel diameter	75 100 125mm
Width of Tread	26 32 32mm
Hardness of tread	Shore A 87
Centre hole	8mm
Offset	30 35 38mm
Overall height	98 129 155mm
Temperature	(-) 20/ -80 °C
Load capacity	60 80 100kg

Shopping cart caster  

 Bolt hole castor, housing made of pressed steel, bright zinc plated, double ball race swivel head.

Wheel centre made of Polypropylene 

Tread: thermoplastic rubber, grey non-marking, precision ball bearing  

Caster TypesRigid A rigid Caster has a rigid yoke and wheel assembly which permits only straight-line movement. 

Swivel A swivel caster has a swivel yoke and wheel assembly that will allow rotation of 360 degrees, which permits movement in any direction. 

Locking A locking caster is an assembly that can be locked in place by some sort of mechanic device.

  

 

  

  

Mark	Definition
	Indicating dangerous situation which is critical for safety as incorrect use may inflict the personal death or serious injury.
	Indicating dangerous situation which is critical for safety as incorrect use may inflict the personal death, serious injury or property damage.
	Indicating dangerous situation as incorrect use may inflict the light personal injury or property damage.

Installation

*Select a model within the range of recommended load per 4 casters of product not exceeding the

maximum loads of equipment or carts.

*Tightly fasten the plate of both faces with bolts & nuts. not to have any gaps.

*Once the model is selected. manufacture the hole distance, hole size, tap & others of Top Plate &

Equipment Plate of selected model either identical or mountable.

How to use

*Following instruction must be complied when using the product, a caster making equipment or carts'

moving easier. Failure in compliance of following instruction may cause the damage on caster, physical

loss of equipment or personal injuries.*Distinguish Manual Driven Casters and Power Drive Casters as per the characteristic of product.  

*The moving of Manual Driven Casters should be made with a speed slower than 4km/h and Power

Driven Casters should be made with a speed slower than 20km/h.*Pay attention not to have the loads of equipment or carts laid to one side, as it may cause inclination.

 http://www.rounya.com               http://www.ry-caster.com

TPR wheel Conductive bolt hole swivel shopping cart caster